Bobcat Model - 463 1.3 Tonne Skid Steer Loader
Bobcat 463 Specifications
The Bobcat 463 skid steer loader was built between 2001 and 2008 before being replaced by the Bobcat S70. It was commonly known that the Bobcat 463 skid steer loader could do duties and activities that required little room. Areas that were inaccessible to larger equipment might be worked in by smaller construction equipment. The Bobcat 463 may also replace labourers with its quick, compact, and effective tilling, grading, and excavation capabilities.
Technical Specifications
A three-cylinder, 1.0-liter, 22.5-horsepower Kubota D1005-E engine provided the Bobcat 463 with its power. The 463 engine's 61.1 cubic inch displacement ran on diesel fuel. The Bobcat 463 is four-wheel drive and includes a hydrostatic transmission. The arms and bucket of the Bobcat 463 may be raised and lowered using hydraulics. The steering and speed of the Bobcat 463 were controlled by two hand levers.
The Bobcat 463 could carry three weights: 2,708 pounds of operational weight, 700 pounds of rated working weight, and 1,405 pounds of tipping weight. The Bobcat 463 features standard 5.7-inch by 12-inch tyres and has a top speed of 6.5 mph. The Bobcat also had a hydraulic pump that could move a variety of attachments, such as buckets, a utility grapple, and snow blowers, at a rate of 10 gallons per minute.
The Bobcat 463 was 100.8 inches long with the bucket attachment mounted; without it, it was 75.5 inches long. The width of the Bobcat 463 was 35.4 inches without a bucket attachment and 36 inches with one. The Bobcat was 71.4 inches tall, and the bucket hinge pin was 94.5 inches above the ground. The Bobcat featured a 61.3-inch turning circle and a 28.4-inch wheelbase.
A few of the features that the Bobcat offers include the lift arm support, front and back illumination, operator cab, and front auxiliary hydraulics. Additional options included a top window, cab heater, key-less start kit, revolving beacon, suspension seat, and a reverse alarm. Some of the accessories for the 463 included a backhoe, bucket, pallet fork, snow blower, trencher, angle broom, breaker, utility fork, and fork.
Shuvs Digger Hire Buckinghamshire Copyright© 2022 All Rights Reserved